Legend |
 |
|
Stainless
Steel Coupling meets most square-drive actuator dimensions.
Supplied coupling is typically the only component that may require
modification for non-standard automation.
Back To Exploded View |
 |
|
Stainless
Steel Mounting Pad provided with every valve meets the dimensional
standards of ISO 5211 – which is the basis for a sturdy,
clean, direct-fit onto most rotary actuator brands and models.
The mounting pad may be removed to permit special automation packages,
thus making the Cosmix valve very automation-friendly.
Back To Exploded View |
 |
|
Hastelloy-C® Stem offers
excellent corrosion-resistant properties and ample hardness to drive
the ball indefinitely. Standard stem may be replaced with virtually
any material to maximize process compatibility and longevity.
Back To Exploded View |
 |
|
Carbon-Filled
Teflon®is
stiffer, has a higher temperature limit and does not cold-flow.
O-Rings are kept energized without the need for periodic packing
re-adjustment.
Back To Exploded View |
 |
|
Stainless
Steel Housing allows the valve to be exposed to extremely harsh
environments without external corrosive degradation. It securely
encloses the ceramic components and protects them from any possible
damage. Pipe stresses are not transferred to the ceramics but are
absorbed by the housing – as all flange bolts are bolted
directly onto the housing itself.
Back To Exploded View |
 |
|
PTFE
Gaskets cushion the ceramic against the stainless steel and
offer extra sealing protection should any of the ceramic components
fail.
Back To Exploded View |
 |
|
Solid
Ceramic Body fully encapsulates the ball and acts as the pressure
containing vessel when assembled with the socket. This ensures
that aggressive fluids do not come in contact with any of the external
stainless steel components.
Back To Exploded View |
 |
|
Thick,
Solid Ceramics. Proof of a sound, highly-engineered valve design.
By utilizing solid, heavy-wall ceramic components, the valve is
able to survive in continuous service far longer than coated or
lined valves. This adds to the durability of the valve and is less
susceptible to damage from abuse or rough handling.
Back To Exploded View |
 |
|
Solid
Ceramic Ball resists corrosion and abrasion and is offered
in a wide variety of equal-percent and round ported styles. Floating-ball
design requires very little actuation torque and minimizes the
possibility of fracture due to over-torquing. Having a minimal
amount of “dead-torque” allows the ability to handle
high differentials, as well as having abundant strength to shave-off
any surface accumulation.
Back To Exploded View |
 |
|
Equal
Percent or Round-Port. Each line size offers up to five different
trims; four equal-percent and one round-port. This variety of trims
enables Fujikin to specify the perfect trim for precise control
and minimized downstream seat wear.
Back To Exploded View |
 |
|
Serialization enables
us to follow every valve’s history – from manufacture
to repair – information that allows constant product improvement
and development. All ceramic components – as well as valve
assembles – are assigned a unique serial number, which provides
our end users with an increased level of technical support and order
history tracking.
Back To Exploded View |
 |
|
Solid
Ceramic Socket resists abrasion and is not marred by trapped
solids. Symmetrical in design, it may be rotated during scheduled
maintenance to extend useable life up to twelve times. Grooved
external sealing surface guarantees leak-free installations with
low bolt torque.
Back To Exploded View |
 |
|
Stainless
Steel Flange is held in place with flush hex socket bolts.
This allows quick access to all internal components without the
need for special tools, complicated alignment and assembly procedures,
or time-consuming factory returns. In fact, valve repair is so
simple and quick, we recommend it be done on-site.
Back To Exploded View |
